Ecological drying: at the end of the program the door opens automatically
AWD655-8XEL is an under-the-counter washing disinfector, it is equipped with a manual opening and closing door made in stainless steel. It is perfect for dental clinics and ward departments and it is characterized by a side compartment for inserting the detergent tank. AWD655-8XEL is equipped with an ecological drying system: at the end of the washing cycle the machine partially opens automatically the door to dry the instruments with a natural air recirculation, saving on consumption.
On request, AWD655-8XEL can be integrated with a stainless steel support under the machine that provide an ergonomics height of 150 cm when the machine is not installed undercounter, making the access to the machine easier for the operator. The support is also useful for storing detergent tanks. A large variety of accessories completes AWD655-8XEL, suitable for washing and disinfecting all types of surgical instruments, handpieces and accessories.
AWD655-8XEL is designed to meet EN-ISO 15883-1/2 and 5 hygiene standards and is CE marked as a Medical Device in accordance with European Directive 93/42/EEC.
High Tech Features AWD655-8 Eco DENTAL (Where available) :
On request, the machine can be accompany with a firmware option that allows to manage a secure access to the programs by the users. An user name and password protection level limit the access to the device only to authorized personnel.
On request, the machine can be accompany with the software “Washer RePortal” (running on OS MS Windows), available under license. With this software it is possible to connect to the machine to manage the user PIN and download, via USB PenDrive, the cycles ran, that are saved on a special database, moreover it is possible to generate the cycle reports in PDF format and export them in CSV format, compatible with the most popular softwares (MS Excel, Open Office, etc. …).
The 2 USB ports are located on the front:
- USB 2 type A for PC USB: allows to connect the machine to a PC for programming;
- USB 2 type B for flash drive: allows to download the history of programs executed and alarms, or for update the firmware and dataset.
The RS232 port allows to connect the machine to a printer or to a centralized traceability system.
The machine is equipped with a sensor placed in the suction probe of chemical products, which warn the user if the liquid is running out through a warning that appears on the LCD display.
The dosing system for chemical products is controlled by a flowmeter. If the flowmeter doesn’t perceive the passage of the liquid, after a few seconds the display will show an alarm that warns the operator of the non-dispensing of the liquid in the wash chamber, causing a cycle stop.
The machine is equipped with an effective steam condenser system that acts to reduce the steam during the disinfection and drying phases.
The machine is equipped with an ecological drying system: at the cycle end the machine automatically opens the door, partially, to dry the instruments with a natural air recirculation, saving on consumption. Read the user manual for more info and details.
On request, the machine is equipped with a printer that prints the receipt log of the running program.
It is a system that makes it possible to soften the cold and hot water entering the wash chamber, so as to reduce the formation of limestone in the hydraulic circuit of the machine. The machine automatically regenerates the resins based on the water hardness set at the time of installation.
On request, the machine is equipped with a conductivity probe that checks the water purity level at the end of rinsing, before disinfection. The machine repeats the rinse cycle again to remove any residue if the conductivity probe detects a water purity level, expressed in μS/cm, higher than the preset one.
On request, the machine is equipped with the spray arm monitor system. If the spray arm monitor is enabled, it checks the correct rotation of the spray arm. An alarm message on the display will indicate a problem during the cycle.
The machine is equipped with a microcontroller that constantly monitors its operation. It’s provided with an internal flash memory that allows the machine to store all the information regarding: cycle params, allarms and log history. An internal watchdog monitor the microcontroller and block the device in case of a malfunction.
Thanks to a dedicated pressure switch that monitors in real time the water pressure of the washing circuit, all the washing parameters will be always perfect. An alarm message on the display will indicate if there’s a pressure lost during the cycle, causing a cycle stop.
On request, the machine can be equipped with a LED light positioned inside the wash chamber, with low energy consumption, for a better visibility during the wash cycle and during loading and unloading of the basket. The LED may vary in color depending on machine status. In the event of an alarm, the wash chamber lights red; when the cycle is successfully completed, the wash chamber lights green.
The machine is supplied with a set of standard programs, variable according to the model. It is possible to add some customizable programs, up to a maximum of 40 total programs.
The wash chamber is made of stainless steel AISI 316L (EN 1.4404) while the chassis and external panels are made of stainless steel AISI 304 (EN 1.4301). They are shockproof and long-lasting. Scotch Brite surface finish makes cleaning easier.
Thanks to the ergonomic handle, on models equipped with manual door, the door opening and closing functions are made easy without efforts.
On request, the machine can be integrated with a stainless steel support, that provide an ergonomic height when the machine is not installed under the counter, making the access to the machine easier for the operator. The support is also useful for storing chemicals.
The machine is equipped with an automatic door locking system which ensure a safety door block. For the safety of the operators, the machine does not allow the door to be unlocked during the wash cycle or in the presence of high temperatures. An extra sensor guarantee that, even if in presence of a malfunction of the machine, the water pump will be switched off with the unlock of the door.
The touch control panel consists of 8 backlit keys and a 3.5” LCD display. The flat display with colour graphics shows all cycle parameters, alarm messages, measured temperatures of the two temperature probes positioned in the wash chamber, drying temperatures and A0 value.
This system helps the operator to understand why an alarm has occurred before consulting the user manual. A text appears on the display with
the number, the image of the alarm and the text explaining the possible causes of it.
The side panel equipped with a special handle to allow access, has a removable lower tray to facilitate cleaning operations. It allows to store up to 4 x 5 liter tanks.