English 
Italiano
It is a system that makes it possible to soften the cold and hot water entering the wash chamber, so as to reduce the formation of limestone in the hydraulic circuit of the machine. The machine automatically regenerates the resins based on the water hardness set at the time...
AWD 655-10 DIN
Manual door model for surgical departments and small central sterilization departments, with 5 washing levels and connection for washing and disinfecting tubular instruments. Large variety of baskets to wash and disinfect all kinds of surgical instruments, included the tubular ones.
Conductivity probe
On request, the machine is equipped with a conductivity probe that checks the water purity level at the end of rinsing, before disinfection. The machine repeats the rinse cycle again to remove any residue if the conductivity probe detects a water purity level, expressed in μS/cm, higher than the...
Spray arm monitor
On request, the machine is equipped with the spray arm monitor system. If the spray arm monitor is enabled, it checks the correct rotation of the spray arm. An alarm message on the display will indicate a problem during the cycle.
Microcontroller
The machine is equipped with a microcontroller that constantly monitors its operation. It’s provided with an internal flash memory that allows the machine to store all the information regarding: cycle params, allarms and log history. An internal watchdog monitor the microcontroller and block the device in case of a...
Reliable washing
Thanks to a dedicated pressure switch that monitors in real time the water pressure of the washing circuit, all the washing parameters will be always perfect. An alarm message on the display will indicate if there’s a pressure lost during the cycle, causing a cycle stop.
Customizable programs
The machine is supplied with a set of standard programs, variable according to the model. It is possible to add some customizable programs, up to a maximum of 40 total programs.
Alarm-check system
This system helps the operator to understand why an alarm has occurred before consulting the user manual. A text appears on the display with the number, the image of the alarm and the text explaining the possible causes of it.
Touch-pad keyboard with graphic display
The touch control panel consists of 8 backlit keys and a 3.5” LCD display. The flat display with colour graphics shows all cycle parameters, alarm messages, measured temperatures of the two temperature probes positioned in the wash chamber, drying temperatures and A0 value.
Door locking and security system
The machine is equipped with an automatic door locking system which ensure a safety door block. For the safety of the operators, the machine does not allow the door to be unlocked during the wash cycle or in the presence of high temperatures. An extra sensor guarantee that, even...
Ergonomic handle
Thanks to the ergonomic handle, on models equipped with manual door, the door opening and closing functions are made easy without efforts.
About Us
AT-OS is a worldwide designer, developer, manufacturer and marketer of washing and disinfecting machines for medical devices, stainless steel furniture for operating rooms and CSSD (sterilization department).
Based in Verona, Italy, AT-OS provides hospitals, retirement houses, private clinics, dental clinics, and pharmaceutical industries, with top notch products such as Instrument washer-disinfectors, Bedpan washer-disinfectors, dry storage cabinets for endoscopes, and furniture for central sterile departements.
Our experience in the medical sector and our trained staff guarantee a professional service and total client satisfaction.
Articoli recenti
- Communication from the CEO of AT-OS SRL, Mr. Paolo Lorenzini
- AT-OS to produce in Japan a line of washing machines for medical devices
- ENDO 3: the new ventilated cabinet for endoscopes by AT-OS
- The perfect sluice room
- Sluice room: how should medical devices be washed to eliminate Clostridium difficile?
Contacts:
Sales:
sales@at-os.com
Customer service :
service@at-os.com
Info
Address:
AT-OS S.r.l. Viale del lavoro, 19 37030 Colognola ai Colli Verona ItalyHow to reach us:
By car: highway A4 – exit VR EST.
By Airplane: Aeroport of Verona “Valerio Catullo”.
By train: Verona Porta Nuova railway station.
Training Center
This is the AT-OS training center. It's aim is to training people to better understand our products technology.
