Optimising sterilisation centres
The innovative DTS - Dynamic Transfer System offers total automation, traceability and optimisation of production processes; combined with the quality and excellent performance of the 18 DIN AWD655-15AD thermal disinfection instrument washers, it is the ideal solution for total sterilisation centre management.
Hygiene, safety, total practicality: the DTS system offers the highest technological level in the sector.
How the DTS system works
The DTS system consists of a loading module in the dirty area which, via an automatic roller system, loads the trolley with the soiled instruments onto a shuttle. The shuttle, moving horizontally along the front of the instrument washer, automatically loads the trolley into the first available machine. The customised washing programme for the specific trolley starts automatically. Once the washing programme has been correctly executed, another shuttle is operated in the clean area, which unloads the trolley with the cleaned instruments from the instrument washer disinfector and transfers it to an unloading module. The trolley is ready for the next steps.
The operator pushes the trolley with the dirty tools onto the automatic loading module via the medical instrument trolley.
The automatic loading module transports the trolley onto the transport shuttle.
The shuttle transports and loads the trolley with the soiled instruments into the instrument washer disinfector.
The machine automatically activates the specific washing programme for the loaded trolley.
The shuttle unloads and transports the clean trolley to the automatic unloading module.
The automatic pass-through system allows the return passage of the washing trolleys from the clean area, where they are emptied of treated instruments, to the dirty area, where they are filled again for the next disinfection cycle in the instrument washer disinfectors.
Automatic Loading and Unloading system
The automatic loading and unloading system speeds up and simplifies workflows in large sterilisation departments, improving operational efficiency and safety. Applicable to the AWD655-10A and AWD655-15A models, the system automates the trolley handling phases, reducing manual intervention by operators. The modular configuration, with storage capacity for up to 3 trolleys, allows for orderly and continuous load management, ensuring safe and controlled separation between dirty and clean areas, in full compliance with sterilisation protocols.
Automatic loading
The washing trolley is automatically transported in front of the door, which opens automatically if the device is free.
Starting the wash cycle
The trolley is pushed into the washing chamber, the door closes, and the specific cycle for the trolley inserted begins.
Automatic discharge at the end of the cycle
At the end of the cycle, the discharge door opens and, if the discharge system is clear, the trolley is pulled out.
Modular system
Modular system that can store up to 3 trolleys, both in the loading and unloading areas.
The digital heart of safe and traceable sterilisation
The monitoring system
In a Sterile Services Department (CSSD), it is essential to monitor and trace washing cycles and all related information. The Gateway system enables a secure connection between the machine and external devices, allowing remote supervision of washer-disinfectors, data collection and storage on the hospital server, and access to process information. Integration with AT-vision facilitates cycle analysis through graphical displays of operating parameters, alarms, and consumption data, while ensuring the retention of documentation required for legal and regulatory compliance purposes.
Secure Connection via Gateway
The Gateway system enables the connection of devices dedicated to instrument reprocessing, providing a secure link to external systems and integrating them into a single supervision platform. This allows centralized monitoring, efficient data exchange, and seamless management of the entire reprocessing workflow.
Real-time monitoring
Through the AT-vision monitoring and supervision software, operators can control and manage up to five machines simultaneously in real time. The system provides a clear overview of each machine’s operating status and enables continuous monitoring of completed cycles through the immediate decoding and display of process data and operating information.
Search and Printing of Specific Cycles
Thanks to the advanced search function, operators can select a specific time period and browse the list of all completed cycles. They can then retrieve the information related to the desired cycle, export the relevant data, and print its graphical representation for documentation, analysis, or reporting purposes.
Smart control system
Upon request, the monitoring system can be connected to a tablet, providing a more user-friendly and customizable operating experience. This solution enables operators to easily supervise workflows, access washing data in real time, and manage process information with greater flexibility and convenience.
Would you like more information?
Fill in the form and one of our consultants will contact you to discuss further.
