AWD655-8L

Description

Machines equipped with a manual opening and closing door made in double tempered glass (AWD655-8L) or stainless steel (AWD655-8XEL), for laboratory glassware with 2 independent levels. AWD655-8L is equipped with a system that filter, electrically heat and force, with a powerful blower, the air in the wash chamber and inside the hollow instruments, to obtain an excellent drying result. A wide range of racks, nozzles and accessories complete these machines, suitable to wash and dry a wide variety of laboratory glassware.

Technical features
Weight kg
Width mm 900
Dept mm 650
Height mm 845
BROCHURE LABORATORYDownload brochure
Accessories

Full features

Weight kg
Width mm 900
Dept mm 650
Height mm 845
Code 112502009
External dimension (WxDxH) mm 550x500x600
Chamber dimension (WxDxH) l/mn 370
Max pump flow rate m³/h 180
Max absorbed power kW 6.2
Max number of dosing pumps for chemicals with flowmeters 4
Chemical tank capacity l 5

High Tech Features AWD 655-8 LAB (Where available) :

AWD655-2 (stainless steel door, without drying system), AWD655-8XE and AWD655-8XEL are without drying system: at the cycle end the machine automatically opens the door, partially, to dry the instruments with a natural air recirculation, saving on consumption. Read the user manual for more info and details.

Thanks to a dedicated pressure switch that monitors in real time the water pressure of the washing circuit, all the washing parameters will be always perfect, ensuring the validation of each cycle. An alarm message on the display will indicate if there’s a pressure lost during the cycle, causing a cycle stop.

During the drying phase the forced air, pushed by a blower, is introduced into the washing chamber, passing through an electric heater. The air then comes out of the jets of the impellers to ensure a warm uniform air distribution. The HEPA H14 filter allows to block the fine dust present in the air with an efficiency of 99.995%. Furthermore, in order not to damage the filter, a pre-filter is placed in front of it to block the larger particles.

On request, the machine is equipped with a printer that prints the receipt log of the running program.

It is a system that makes it possible to soften the cold and hot water entering the wash chamber, so as to reduce the formation of limestone in the hydraulic circuit of the machine. The machine automatically regenerates the resins based on the water hardness set at the time of installation.

It is a system that makes it possible to soften the cold and hot water entering the wash chamber, so as to reduce the formation of limestone in the hydraulic circuit of the machine. The machine automatically regenerates the resins based on the water hardness set at the time of installation.

Su richiesta, la macchina è dotata di un sistema di monitoraggio del braccio irroratore. Se il monitoraggio del braccio irroratore è abilitato, esso ne controlla la corretta rotazione. Un messaggio d’allarme sul display indicherà eventuali problemi durante il ciclo.

The machine is equipped with a microcontroller that constantly monitors its operation. It’s provided with an internal flash memory that allows the machine to store all the information regarding: cycle params, allarms and log history. An internal watchdog monitor the microcontroller and block the device in case of a malfunction.

Thanks to a dedicated pressure switch that monitors in real-time the water pressure of the washing circuit, all the washing parameters will be always perfect, ensuring the validation of each cycle. An alarm message on the display will indicate if there’s a pressure loss during the cycle, causing a cycle stop.

On request, the machine can be equipped with a LED light positioned inside the wash chamber, with low energy consumption, for a better visibility during the wash cycle and during loading and unloading of the basket. For AWD655-2 and AWD655-8 (and variants), the LED may vary in color depending on machine status. In the event of an alarm, the wash chamber lights red; when the cycle is successfully completed, the wash chamber lights green.

The machine is supplied with a set of standard programs, variable according to the model, and with the addition of customizable programs, up to a maximum of 40 total programs.

Richiesta informazioni

Use this form to inquire
  • Company name
  • This field is for validation purposes and should be left unchanged.
Copyright 2021 AT-OS S.r.l. Viale del lavoro, 19 37030 Colognola ai Colli Verona Italy. +39 045 6159411 Fax: +39 045 6159422 Email: info@at-os.com P.IVA: 02719270239 Posta elettronica certificata (PEC): at-os.amministrazione@pec.it | N° Rea: 258189 Ufficio di Verona | Capitale in bilancio € 145.600,00
or

Log in with your credentials

or    

Forgot your details?

or

Create Account